Product Catalog

The base model of the series: pumps manure from collectors and pits to storage and vehicles. Takes the mass at natural moisture from 75% — without the dilution water the farm would then have to store and haul. Capacity up to 300 t/h on liquid manure.

The same VTN-1 with a 3 m pump end: it reaches the bottom of deep pits and sunken tanks a standard column cannot. Hydraulics and maintenance stay standard — capacity up to 300 t/h, head up to 24 m. For tasks where the flagship would be overkill.

The flagship of the series for large complexes: capacity up to 650 t/h on liquid manure, submersion from 0.5 to 10 m. One unit covers volumes that would normally take two pumps — less installation, wiring and fewer points of failure.

The most compact pump-mixer of the series: it stirs the mass in the intake area (radius up to 5 m) and delivers it homogeneous into the line — no separate agitator needed. Compact versions from 5 kW fit through an installation opening from 300×300 mm.

The autonomous model: driven by a tractor PTO, it pumps where there is no mains power — no foundation, no electrical work. The boom lowers the pump straight into the mass: intake from 2.5–5.5 m, up to 6 m with the extended boom. One unit serves every point of the farm.

The first stage of manure removal: our own screw conveyor collects the mass from the building's channels and feeds it into the receiving pit to a VTN pump — replacing daily manual cleaning. Flight diameter 300 mm; line length and drive are calculated for the site.

Separates the manure mass into fractions so it no longer has to be stored and hauled whole: the solid fraction (moisture 30–85%) goes to compost and bedding, the liquid one (up to 99%) — to irrigation or the slurry tank. Productivity up to 150 m³/hour.

The same URNS-1M centrifuge on a mobile carrier: a trailer, a demountable module or a truck chassis with a loader crane — one unit serving several sites. A concept we develop to order on the customer's carrier; configuration and specifications are agreed per project.

Collects and stores the liquid fraction: buried steel cylindrical modules — 100–200 m³ per collection point, with capacity extended by adding a module. No capital concrete construction; mixing and pumping-out are done by VTN pumps inside the tanks.